GU200S New Option and Imperial System Unit

Due to strong demands and global chip shortage, Broadsens's wireless gateways are running out fast. Wireless gateways control multiple ultra-low power wireless vibration and temperature sensors. They show real-time data visualization, save data and analyze machine conditions, and send data or analysis result remotely to clouds or servers. To solve the chip shortage issue, and also bring the best value to the customers, Broadsens is going to offer a new option for wireless gateway GU200S: 2GB RAM with 32GB EMMC storage. The new option is starting to ship from March 10, 2022.  EMMC offers slightly faster speed than the microSD card, which should provide slightly performance improvement. 2GB RAM allows the system run smoother with continuous data acquisition. The 32GB version GU200S wireless gateway is available to pre-order from March 5, 2022. The lead time is expected to be about 20 days due to high demand.

The main specs of the new wireless gateway GU200S is as follows:

MicrocontrollerARM Cortex-A72 1.5Ghz 64 bit
Operating systemLinux Debian
RAM2GB
Data storage32GB
Network interfaceWIFI/Ethernet
Sensor interface2.4GHz ultra low power protocol (FCC approved)
Number of wireless sensorsUp to 256 (8 SVT200-V, 248 vibration & temperature sensors).

Recommended usage: Up to 4 SVT200-V sensors, up to ten zones, with four SVT-A series sensors at each zone for the optimal performance

Power supply9-18 VDC
Power consumption15W
Weight700g
Size(L*W*H141*126.5*30.5mm
Working environmentTemperature: -30℃~60℃; humidity: 10%~90%RH
Additional featuresReal-time hardware clock; Over-the-Air update, USB interface
Wireless gateway GU200S

Wireless gateway GU200S

Imperial unit option is also available starting from BroadVibra software version 2.3.0. The unit selection can be adjusted easily at the gateway configuration page. No system restart is required during metric and imperial unit switch. To be consistent with previous systems, the underlying data storage is based on metric unit. The MQTT data output is also based on metric unit. During data review and export, the wireless gateway automatically converts the data to the proper unit.

 

6 thoughts on “GU200S New Option and Imperial System Unit

  1. Reply
    Nerdme - March 4, 2022

    EMMC runs faster. We love the option to have EMMC storage.
    Do you ship to Cape Town, Africa? We have a cement factory that needs wireless vibration sensors and gateways. Thanks!

  2. Reply
    Roger Augustine - March 6, 2022

    Your wireless vibration sensors are the most advanced that we have used. The compact size, light weight and long battery life are crucial for our motor line predictive maintenance

  3. Reply
    admin - March 10, 2022

    @Nerdme. Yes we do ship to Africa. We have customers world wide.
    @ Roger. TY!

  4. Reply
    Paka - March 10, 2022

    The long data acquisition ability of your wireless vibration sensors is amazing!

  5. Reply
    Philips - March 17, 2022

    Most wireless vibration sensors are bulky and heavy. The weight affects vibration measurement accuracy negatively.

    Your wireless vibration sensors are very small, but have more features than other wireless vibration sensors we used before. Thank you!

  6. Reply
    Kevin - March 30, 2022

    Excellent wireless vibration sensors. Can the wireless vibration system work without internet connection?

Leave a Reply

Your email address will not be published.